What to Do If It's Leaking
Emergency steps: what to shut off and when to call.
Top leaks usually come from the pipe connections, corroded fittings, the T&P relief valve or the anode rod port. Because the tank may still be sound, these are often repairable.
Water runs down the tank, so a top leak often ends up as a puddle at the base. Always trace the source upward.
| Cause | What you may see | Typical fix |
|---|---|---|
| Loose or worn pipe connections | Drips at hot or cold pipe junction | Re-seal or replace the connection |
| Corroded nipples or fittings | Rust or white/green crust at top ports | Replace nipples; check tank threads |
| T&P relief valve | Water near valve or at discharge pipe end | Find the cause; replace the valve if needed — see T&P guide |
| Anode rod port | Moisture around hex head on tank top | Re-seal or replace the anode rod |
| Flue condensation (gas) | Water dripping from flue or draft hood | Have venting checked |
| Tank failure | Water from tank top or jacket; rust-stained insulation | Replace the heater |
Usually from hot or cold connections, corroded nipples, the relief valve or the anode rod port.
It can be. Water above the heater can reach electrical components or a burner. Shut off power or gas and the cold water, then have it checked.
When the heater is old, heavily corroded, or when the leak has damaged the tank threads. See replacement.
Prescott Water Heater Experts is a referral service, not a licensed plumbing contractor. Providers are independent and responsible for their own licensing, pricing and workmanship.
Call 877-722-6903 for local repair or replacement help.