What to Do If It's Leaking
Emergency steps: what to shut off and when to call.
The T&P valve is a safety device. It opens when pressure or temperature inside the tank goes too high. A drip usually means high incoming pressure, thermal expansion, a thermostat set too high, or a worn valve. Never plug or cap it.
A steady flow, hissing or very hot water at the tap is urgent — shut off power or gas and the cold water, then call for help.
It opens to release water if pressure or temperature inside the tank exceeds safe limits. A discharge pipe carries that water safely downward. If your heater has no proper discharge pipe, ask a professional to add one.
The City of Prescott's water report explains that a failing pressure regulator valve (PRV) is the most common cause of high or low pressure and water hammer. The typical PRV is set to 50 psi at the factory, but PRVs wear out. A failing PRV is the homeowner's responsibility and can cause a relief valve to drip. See also water heater noises.
| Cause | What is happening | Typical fix |
|---|---|---|
| High incoming pressure | Worn or misadjusted PRV lets pressure climb above normal | Test pressure; adjust or replace the PRV |
| Thermal expansion | Heated water expands with nowhere to go in a closed system | Install or replace a thermal expansion tank |
| Thermostat set too high | Water temperature climbs above the set point | Lower the setting; replace a faulty thermostat or element |
| Worn or fouled valve | Mineral buildup or age prevents the valve from seating | Replace the valve (with a proper discharge pipe) |
| Heater failing | Repeated discharge despite correct pressure and temperature | Have the system evaluated; replacement may be needed |
Most often because of high water pressure, thermal expansion, an overly hot thermostat setting or a worn valve.
No. The valve prevents dangerous overpressure. Plugging it creates a safety hazard.
A slow drip is a warning that should be checked. A steady flow, hissing or very hot water is urgent.
A gauge on an outdoor spigot shows your pressure. A professional can confirm and adjust it.
Prescott Water Heater Experts is a referral service, not a licensed plumbing contractor. Providers are independent and responsible for their own licensing, pricing and workmanship.
Call 877-722-6903 to get connected with local help.